Sony STU-531 User Manual

RemoteCommander —__
———t a eee
The
remote
commander
supplied
with
this
unit
can
control
the
unit
from
a
distance.
The
remote
commander
is
divided
into
6
sections
according
to
the
functions
as
shown
below.
RM-US21
(1) Power control block .
SYSTEM OFF button: Turns off the power of the whole
system: LOP, VTR, TV, and AUDIO.
LDPVTRANTR2VTRS/TV/AUDIO POWER buttons:
Control the power of each unit. -
(2] MODE selector
Selects the function mode on the remote commander.
4: To select the functions indicated in light gray such as
DECK, DAT, CD player and the SURROUND mode of
amplifier.
2: To select the functions indicated in blue such as VTR,
LDP (Laser disc player) and TV.
[3] CDP/LDP control block
The combined CD/LD player can be controlled with LDP
position.
&: Play
it, Pause
m: Stop
D (disc) SKIP: Disc skip (for a CD player equipped with
a multi-disc changer)
<4</>>: Manual search (only for LD player)
\<t</>b}, Locates a desired selection.
[4] Tape deck/VCR control block
DECK/VTR selector
DECK A,B, and DAT: Selects Deck A, B or DAT deck.
VTR 1, 2, and 3: Set to the VTR 1, 2 or 3 according to
your VCR setting.
1; Betamax VCRs
2: 8 mm VCRs
3:VHS VCRs ~ 7
it: Pause
g@: Stop
</>: Fast winding
</>: Play
A
@ (REC): Recording
ANT (antenna) TV/VTR button: Selects the output signal
from the antenna terminal on the VCR, either a TV
signal or VCR programs.
VTR CH (channel) +/- buttons: Select channel on the
VCR.
[5] Tuner/TV block
SHIFT and TUNER PRESET/ TV CH (channel) +/- buttons:
Select a preset station of the tuner or a channel
of the TV.
{6} Amplifier/TV block ?
TVNIDEO button: Selects the input signal of the TV.
(for TV)
Program number (1 to 0) and ENTER buttons: Select the
channel. (for TV)
SURROUND mode selectors (for the amplifier)
ON/OFF: Turns on/off the surround mode.
MODE: Selects the surround mode.
-T.(Test) TONE: Generates a pink noise signal that is sent
in succession to each speaker.
DELAY: Adjust the delay time.
FUNCTION selectors: Select an input source of the
- amplifier. (for the amplifier)
REAR VOL +/- buttons: Control the volume of rear
speakers (surround level).
CENTER VOL/TV VOL +/- buttons: Control the volume of
- . center speaker (surround level) or TV.
DBFB button: Turns on/off the DBFB (Dynamic Bass
Feed Back). (for the amplifier)
MASTER VOL +/- buttons: Control the amplifier volume
(for the amplifier).
Inserting the batteries into the remote commander
1 Open the cover.
2 Insert two size AA (R6)
batteries with correct
Battery life
About half a year of normal operation can be expected
when using the Sony SUM-3 (NS) batteries.
- When the batteries are exhausted, the commander can no
longer operate the unit. Replace both batteries with new
ones.
To avoid battery leakage
When the commander is not to be used for a long period of
time, remove the batteries to avoid damage caused by
battery leakage and corrosion.

Sony STU-531 Specifications

General

Brand	Sony
Model	STU-531
Category	Amplifier
Language	English