Sony STU-531 User Manual

This section describes about the various ways of tuning which are very convenient.
Before reception, be sure to connect the supplied AM and FM antenna.
waeletiaremiel Automatically
3 Press AUTO TUNING to set to the AUTO TUNING
mode.
AUTO TUNING
For a lower ———7¥ For a higher
frequency. ==” frequency.
When a station is received automatic tuning stops.
Indicators in the display
© ‘TUNED’ appears when a station is tuned in.
© “STEREO* appears when an FM stereo program of
sufficient signal strength is received.
2 Press BAND FM/AM to select FM or AM.
To change the AM tuning interval
AND FM/AM The AM tuning interval is preset at the factory to 10 kHz to
match the frequency allocation system of your country. To
change the interval to 9 kHz, proceed as follows.
1 Press SYSTEM POWER to turn on the unit.
2 Set the BAND selector to AM.
3 Press SYSTEM POWER to turn off the unit.
4 While pressing TUNING +, press SYSTEM POWER again
to turn on the unit.
To reset the interval to 10 kHz, follow the same procedure.
Note
When the interval is changed, all stored stations will be
erased from the memory. After changing the interval. be
sure to store the stations again.

Sony STU-531 Specifications

General

Brand	Sony
Model	STU-531
Category	Amplifier
Language	English