Sony Trinitron PVM-14L4 Service Manual

Section 3
Electrical Adjustments
3-1. Equipment Required
+ Oscilloscope
Sony Tektronix 2465 or equivalent (with bandwidth of
350 MHz)
* NTSC/PAL/SECAM component signal generator
Sony Tektronix TG2000 +AVGi (option module)
+AWVGI1 (option module) or equivalent
« Monoscope signal generator
ShibaSoku TP22AX or equivalent
+ VG (programmable video signal generator)
VG814 or equivalent
+ Frequency counter
Advantest TR5821AK or equivalent
PYM-t4LertaLar2oL4
+ Digital VOM
Advantest TR6845 or equivalent
* Variable auto-transformer
+ High tension voltmeter
+ DC power supply
+ Ammeter
+ Luminance meter
Minolta CA-110 or equivaient.
If the Minolta CA-110 is not available, perform the
measurement by visual inspection by comparing the
monitor that has already been adjusted earlier with the
monitor that you want to adjust.
Start the following adjustments after 5 minutes have
passed after the main power is turned on,

Sony Trinitron PVM-14L4 Specifications

General

Brand	Sony
Model	Trinitron PVM-14L4
Category	Monitor
Language	English