29Selecting the Picture Viewing Mode
Projecting
Selecting the Picture Viewing Mode
You can select the picture viewing mode that best suits the type of program or
room condition.
Press one of the PICTURE MODE buttons (DYNAMIC,
STANDARD, CINEMA and USER 1, 2 and 3).
DYNAMIC
Select for enhanced picture sharpness in bright environment.
STANDARD
Recommended for normal viewing condition in your home.
CINEMA
Select for soft, film-like picture in dark environment.
USER 1, 2 and 3
You can adjust the quality of the picture to suit your taste and store the settings
into the selected memory of the projector. Press one of the USER 1, 2 and 3
buttons, then adjust the picture by using the buttons on the remote control or
the menus. (1 pages 30 and 37) The settings are stored, and you can view the
picture with the adjusted picture quality by pressing the button.
INPUTLIGHT
STANDARD
CINEMA
DYNAMIC
USER 2
PICTURE MODE
USER 3USER 1
ADJ PIC
MENUAPA
RCP
RESET
WIDE MODE
ENTER
REAL COLOR PROCESSING
PICTURE MODE buttons
DYNAMIC
STANDARD
CINEMA
USER 1, 2 and 3
To Next Page
Loading...
Need help?
General
