Help Guide
Wireless Stereo Headset
WF-C500
Initializing the headset to restore factory settings
If the headset does not operate correctly even after resetting, initialize the headset.
Press and hold the buttons on both the left and right units of the headset for about 15 seconds.
The indicators (blue) on the headset repeatedly flash twice in a row, and then the indicators (orange) start flashing.
1
Release your fingers within 5 seconds after the indicators start flashing.
The indicators (orange) on the headset light up.
2
Press and hold the buttons on both the left and right units of the headset within 10 seconds after the
indicators on the headset light up.
After a few seconds, the indicators (blue) on the headset flash 4 times.
3
To Next Page
Loading...
