The CD Player
19
Creating your own
program (Program play)
You can arrange the playing order of up to
20 tracks on a CD.
Jog dial
1 Press x when the player is not in CD
mode.
2 Press MODE repeatedly in stop mode
until “PGM” appears in the display.
3 Turn the jog dial toward v or V then
press ENTER/MEMORY for the tracks
you want to program in the order you
want.
Audio CD
ATRAC CD/
MP3 CD*
*You can also select another group pressing
+ or –.
Playing order
Playing order
Programed file
xu MODE
ENTER/
MEMORY
4 Press u to start Program play.
On the remote
In step 3 above, press the number buttons for the
tracks you want to program in the order you want.
On an ATRAC CD/MP3 CD, you can also select
another group pressing + or –.
To cancel Program play
Stop playing first. Then press MODE
repeatedly until “PGM” disappears from the
display.
To check the order of tracks
before play
Press ENTER/MEMORY while programing.
Every time you press the button, the track
number appears in the programed order.
To change the current program
Press x once while programing. The current
program will be erased. Then create a new
program following the programing
procedure.
Tip
You can play the same program again, since the
program is saved until you open the CD lid.
Programed track
To Next Page
Loading...
Need help?
General
Weight and Dimensions
