Sony ZS-SN10 User Manual

24
To customize the sound
1 Press SOUND repeatedly to display
“Custom.”
2 Hold down SOUND until “Custom”
flashes. “Bass” appears after 2 seconds.
3 Turn the jog dial toward v or V to select a
bass sound level (–3 to + 3).
4 Press ENTER/MEMORY and “Treble”
appears in the display.
5 Turn the jog dial toward v or V to select a
treble sound level (–3 to + 3).
6 Press ENTER/MEMORY.
Note
If you disconnect the player from the AC power
source or remove the batteries, the Custom sound
is reset to the factory settings.
Reinforcing the bass sound
Press MEGA BASS to display “MEGA
BASS”.
To return to normal sound, press the button
again to make “MEGA BASS” disappear
from the display.
The Audio Emphasis
Selecting the audio
emphasis
You can adjust the audio emphasis of the
sound you are listening to.
SOUND MEGA BASS
Selecting the sound
characteristic
Press SOUND repeatedly to select the audio
emphasis you want.
Choose To get
powerful, clean sounds,
emphasizing low and
high range audio
light, bright sounds
emphasizing high and
middle range audio
percussive sounds,
emphasizing bass audio
the presence of vocals,
stressing middle range
audio
original sounds. You
can customize bass and
treble sound as you
like (see “To customize
the sound”).
the whole dynamic
range for music such as
classical music
Rock
ENTER/
MEMORY
Jog dial
Pop
Jazz
Vocal
Custom
Off

Sony ZS-SN10 Specifications

General

Bundled software	SONICSTAGE Software 2.0
Audio system	Bass Reflex
Line-in	Yes
I/O ports	Headphone Output
Device type	Personal CD player
Product color	Silver
Preset stations quantity	40
FM band range	87.5 - 108 MHz
LW band range	153 - 279 kHz
Battery type	6 X LR14 (not supplied)
Dimensions (WxDxH)	500 x 230 x 145 mm
Loudspeaker diameter	100 mm
Power requirements	AC 230 V
Number of batteries supported	6

Weight and Dimensions

Weight	3800 g