ST STM32 Nucleo-64-P User Manual

UM2206 Rev 3 7/55
UM2206 Ordering information
54
3 Ordering information
To order the Nucleo-64-P board corresponding to the targeted STM32, refer to Table 1.
The meaning of the codification is explained in Table 2.
This order code is mentioned on a sticker placed on bottom side of the board.
4 Conventions
Table 3 provides the conventions used for the ON and OFF settings in the present
document.
In this document the references for all information that is common to all sale types, are
“STM32 Nucleo-64-P board” and “STM32 Nucleo-64-P boards”.
Table 1. Ordering information
Order code Target STM32
NUCLEO-L412RB-P STM32L412RBT6P
NUCLEO-L433RC-P STM32L433RCT6P
NUCLEO-L452RE-P STM32L452RET6P
Table 2. Codification explanation
NUCLEO-LxxxRy-P Description Example: NUCLEO-L452RE-P
Lxxx STM32 Product line STM32L452
R STM32 package pin count 64 pins
y
STM32 Flash memory size (8 for 64
Kbytes, B for 128 Kbytes, C for 256
Kbytes, E for 512 Kbytes, G for
1MKbyte, H for 1.5 Mbytes and I for
2 Mbytes)
E = 512 Kbytes
-P External SMPS architecture.
Table 3. ON/OFF convention
Convention Definition
Jumper JPx ON Jumper fitted
Jumper JPx OFF Jumper not fitted
Jumper JPx [1-2] Jumper should be fitted between Pin 1 and Pin 2
Solder bridge SBx ON SBx connections closed by 0 ohm resistor
Solder bridge SBx OFF SBx connections left open
Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.

ST STM32 Nucleo-64-P Specifications

General

Brand	ST
Model	STM32 Nucleo-64-P
Category	Motherboard
Language	English