Problem Probable cause Remedy
If any of the faults listed below occurs, replace the relevant fuse (22).
9. The engine does not start or
starts and stops immediately.
The battery is charged.
Fuse 10A blown. Replace fuse 10A.
10. Electrical cutting height
adjustment does not work.
Fuse 20A blown. Replace fuse 20A.
11. All electrical functions are
out of operation. The battery
is charged.
Fuse 30A blown. Replace fuse 30A.
If problems persist after the operations above have been performed, contact your dealer.
Warning! Never attempt to carry out complicated repairs without the necessary tools or
technical ability. Any poorly performed interventions will automatically nullify the warranty
and exonerate the manufacturer from all liability.
To Next Page
Loading...
Need help?
General
