9EN
3. INTRODUCTION
3.2. PRODUCT OVERVIEW
3.2.1. GENERAL DESCRIPTION
The robot lawn mower (A) is designed and built to automatically cut garden grass at any time of day and
night.
Depending on the di erent characteristics of the surface to be mowed, the robot lawn mower can be
programmed to work on several zones delimited by a virtual boundary and connected by virtual transfer
paths.
When operating, the robot lawn mower mows the area delimited by the virtual boundary (B) When
the robot lawn mower is close to the virtual boundary (B) or encounters an obstacle (C) it changes its
trajectory according to the chosen navigation strategy.
The robot lawn mower mows the delimited lawn automatically and completely.
The product works using a satellite signal and requires the installation of a docking station (F) with an
integrated satellite reference station (G), which can also be installed separately. The robot lawn mower and
the satellite reference station communicate with each other via 3G/4G modules tted with SIM cards. The
operating technology of the robot lawn mower is based on data communication between STIGA Cloud and
the robot itself. The subscription fee is mandatory in order to operate the robot lawn mower and is based
on the amount of data required. A smartphone is also required for the product to be used.
Any other usage may be hazardous and harm persons and/or damage things. Improper use includes (for
example, but not limited to): transporting people, children or animals on the machine; being transported by
the machine; using the machine to pull or push loads; using the machine for cutting non-grass vegetation.
NOTE: The subscription fee is mandatory in order to operate the robot lawn mower and is based
on the amount of data required.
FG
C
A
B
A
To Next Page
Loading...
Need help?
General
