EN - 7
6. USING THE MACHINE
The safety regulations to follow are described in
chap. 2. Strictly comply with these indications to avoid
serious risks or dangers.
6.1 PRELIMINARY PROCEDURES
position on the ground.
6.1.1
6.1.2
NOTE This machine can be used to mow lawns in a
number of dierent ways; before starting work, prepare
the machine based on how the lawn is to be mowed.
a.
collection in the grass catcher:
1. Lift the rear discharge guard (Fig.17.A) and fasten
the grass catcher (Fig.17.B) correctly as shown in
the illustration.
2.
b.
rear discharge onto the ground:
1. Remove the grass catcher and check that the rear
discharge guard (Fig.18.A) maintains its lowered
position.
2.
c.
1.
-
2.
(Fig.19.C) into the designated holes until the
3.
1. Lift the rear discharge guard (Fig.19.A).
2. Press the centre to release the to-
othed coupling (Fig.19.D).
d.
side discharge onto the ground:
1.
-
2.
(Fig.20.C) into the designated holes until the
3. Lift the side discharge guard (Fig.20.A).
4. Insert the side discharge chute (Fig.20.E).
5. Close the side discharge guard (Fig.20.A) so that the
1. Lift the rear discharge guard (Fig.19.A).
2. Press the centre to release the to-
othed coupling (Fig.19.D).
6.1.3 Cutting height adjustment
6.2 SAFETY CHECKS
results correspond to those outlined on the tables.
Always carry out the safety checks before use.
6.2.1
Object Result
Grips
Handle
grass catcher
Good condition. No
Side discharge guard,
side discharge chute
Good condition. No
Control lever
Operator presence lever
Drive lever
forcing and should
the neutral position.
(not loose).
To Next Page
Loading...
Need help?
General
