EN - 9
•
•
and the second cut at the height desired.
•
•
•
•
6.4.3
When the grass catcher (Fig.1.G) is too full,
1.
2.
1a.
• Release both levers (Fig.27.A).
1b.
• Release both levers (Fig.28.A).
2.
3. Lift the rear discharge guard (Fig.17.A),
6.5 STOP
1a.
• Release both levers (Fig.27.A).
1b.
• Release both levers (Fig.28.A).
2.
When you have stopped the machine, it will take a
few seconds for the cutting means to stop.
IMPORTANT Always stop the machine.
•
• When driving on grass free surfaces.
•
• Before adjusting the cutting height.
•
•
side discharge chute (if provided).
6.6 AFTER OPERATION
1. Stop the machine (par. 6.5).
2.
3. -
sing and recharge it (par 7.2.3).
4. -
ring in an enclosed space.
5. Clean (par. 7.3).
6. -
-
or contact the authorised service centre.
IMPORTANT Remove the safe key whenever
the machine is unused or left unattended.
7. ROUTINE MAINTENANCE
7.1 GENERAL INFORMATION
The safety regulations to follow are described in
chap. 2. Strictly comply with these indications to avoid
serious risks or dangers.
Before conducting any inspections, cleaning or
maintenance/adjustment interventions on the machine:
•
•
children or unauthorised persons).
•
•
in an enclosed space.
• Read the relevant instructions.
• Use suitable clothing, protective gloves and goggles.
To Next Page
Loading...
Need help?
General
