EN - 10
IMPORTANT Any maintenance and adjustment
operations not described in this manual must be carried
out by your dealer or Authorised Service Centre.
7.2 BATTERY
7.2.1
a.
b.
c.
Setting a cutting height that is too
NOTE During use, the battery is protected against
total drainage with a protective device that switches
o the machine and stops it from working.
7.2.2
7.
8.
7.2.3
1. Open the battery housing hatch and remove the
safety key.
2.
3. -
4.
5. -
NOTE The battery is equipped with a guard
that inhibits recharging if the environmental
temperature is not between 0 and +45 °C.
NOTE The battery can be recharged at any
time, even partially, with no risk of damaging it.
7.2.4
1. Remove the battery from the housing in the battery
charger (do not keep recharging when recharging
is completed).
2.
3.
4.
7.3 CLEANING
7.3.1 Cleaning the machine
•
•
• Do not use aggressive liquids to clean the chassis.
•
leaves, or excessive grease.
To Next Page
Loading...
Need help?
General
