Stiga TC 102 Series User Manual (English)

Other manuals for Stiga TC 102 Series

Workshop Manual86 pages

Quick Guide For Use380 pages

Questions and Answers:

D
Dawn JohnsonAug 19, 2025
Why won't my Stiga TC 102 Lawn Mower engine start, even though the starter motor runs?
- K
  Kristi WhiteAug 19, 2025
  If the starter motor runs but the engine doesn't start, the battery might be insufficiently charged, so recharge the battery. Alternatively, there could be a faulty fuel supply, so check the level in the tank. Open the fuel stopcock, check the fuel filter, or check that the spark plug cap is securely fitted. Also, check that the electrodes are clean and have the correct gap.
A
aaron49Aug 21, 2025
What to do if the dashboard on my Stiga TC 102 Lawn Mower doesn't turn on and there's no sound when I turn the key?
- I
  igibbsAug 21, 2025
  If the dashboard fails to switch on and there is no acoustic signal, it could be due to a badly connected battery or inverted battery terminals, so check the connections. The battery may also be completely discharged, in which case you should recharge it. A blown fuse could also be the cause, so replace the fuse (10 A). Finally, a wet circuit board can cause this issue, so dry it using lukewarm air.
B
Brenda SimpsonAug 23, 2025
How to fix a Stiga TC 102 Lawn Mower that is hard to start or runs erratically?
- S
  Susan MorrisAug 23, 2025
  If your engine is hard to start or runs erratically, the issue might be carburation problems. Try cleaning or replacing the air filter. You can also empty the fuel tank and refill it with fresh fuel. Additionally, check and replace the fuel filter if necessary.
S
Stacey MoodyAug 26, 2025
Why is my Stiga TC 102 Lawn Mower dashboard lit, but the starter motor won't run?
- D
  Dawn NelsonAug 26, 2025
  If the dashboard is illuminated but the starter motor does not run, the battery may be insufficiently charged, so recharge the battery. It could also be due to a blown battery charger fuse, so replace the fuse (25 A).
R
Richard WallaceAug 28, 2025
What to do if my Stiga TC 102 Lawn Mower dashboard doesn't turn on, but I hear a beep when I turn the key?
- L
  Luke AllenAug 28, 2025
  If the dashboard fails to switch on but the acoustic signal is activated, it could be due to a wet circuit board. Dry it using lukewarm air.
H
hullpamelaAug 30, 2025
What does it mean when my Stiga TC 102 engine stops and beeps?
- K
  Kathryn HoweAug 30, 2025
  If the engine stops running and an acoustic signal is generated, it may be due to the battery not connected correctly (poor contacts), so check the connections. It also may be that the battery is disconnected, so check the connections.
J
joygraySep 1, 2025
Why is my Stiga TC 102 vibrating so much?
- J
  Jennifer FarmerSep 1, 2025
  If your machine is experiencing unusual vibrations, stop the machine and remove the ignition key. Inspect for possible damage and check for and tighten any loose parts.
R
Roy HancockSep 3, 2025
Why is my Stiga TC 102 mowing unevenly and not collecting grass well?
- F
  Frank LeeSep 3, 2025
  Uneven mowing and insufficient collection could be due to the cutting means assembly not being parallel to the ground, so check the tyre pressure and reinstate the alignment of the cutting means assembly in relation to the ground. Also, reduce the forward speed and/or raise the cutting device assembly, wait for the grass to dry, or remove the grass catcher and empty the chute if the collector chute is blocked.
A
anthonybradySep 5, 2025
Why does my Stiga Lawn Mower vibrate unusually while I'm mowing?
- X
  xgonzalezSep 5, 2025
  If you notice unusual vibrations while working, it could be because the cutting means assembly is full of grass, so clean the cutting means assembly. Also, check and tighten all the engine and frame bolts if there are loose bolts and screws.
D
Danielle ValentineSep 8, 2025
Why does my Stiga Lawn Mower with side discharge mow unevenly?
- L
  lfischerSep 8, 2025
  If your side discharge model is mowing unevenly, it might be that the cutting means assembly is not parallel to the ground, so check the tyre pressure and reinstate the alignment of the cutting means assembly in relation to the ground.

Stiga TC 102 Series Specifications

General

Brand	Stiga
Model	TC 102 Series
Category	Lawn Mower
Language	English

Summary

2. SAFETY REGULATIONS

2.1 TRAINING

Advises operators to familiarize themselves with controls, proper use, and emergency stops.

2.2 PREPARATION

Outlines necessary preparations, including personal protective equipment (PPE).

2.3 DURING OPERATION

Covers safe operation practices, work area checks, fuel handling, and general behavior.

Maintenance

Emphasizes regular maintenance, use of correct parts, and fire risk reduction.

3. GETTING TO KNOW THE MACHINE

3.1 DESCRIPTION OF THE MACHINE AND PLANNED USE

Describes the ride-on mower, its components, intended uses, and improper usage.

3.2 SAFETY SIGNS

Explains the meaning of various safety symbols found on the machine.

3.4 MAIN COMPONENTS

Identifies and describes the primary functional components of the machine.

4. ASSEMBLY

4.4 MOUNTING AND CONNECTING THE BATTERY

Details the procedure for installing and connecting the machine's battery.

5. CONTROLS

5.1 BRAKE PEDAL

Explains the function and operation of the brake pedal.

5.2 FORWARD GEAR PEDAL

Describes the forward gear pedal for traction and speed control.

5.3 REVERSE GEAR PEDAL

Details the reverse gear pedal for traction and speed control.

5.4 HYDROSTATIC DRIVE RELEASE COMMAND

Explains the dual position command for engaging/disengaging hydrostatic drive.

5.5 KEY IGNITION SWITCH

Describes the three positions of the key ignition switch for starting and stopping.

5.6 THROTTLE COMMAND

Explains how to regulate engine speed using the throttle control.

5.7 PARKING BRAKE LEVER

Details the operation of the parking brake lever.

5.9 CUTTING DEVICE ENGAGE AND DISENGAGE FUNCTIONS

Describes how to engage and disengage the cutting device using the clutch.

5.11 CONTROLS FOR ADJUSTING THE CUTTING UNIT ASSEMBLY HEIGHT

Details methods for adjusting the cutting unit height using levers and knobs.

5.12 SPEED CRUISE CONTROL

Describes the cruise control system for maintaining forward speed.

5.16 TYPE "I" DISPLAY AND BUZZERS

Describes the indicators and acoustic signals for Type "I" display systems.

5.17 TYPE "II" DISPLAY AND BUZZERS

TYPE "III" DISPLAY AND BUZZERS

6. USING THE MACHINE

6.1 PREPARATION

Details pre-operation checks, including fuel/oil, seat adjustment, and tyre pressure.

6.1.4 Preparing the machine before starting work

Outlines preparation steps for different mowing methods: collection, rear discharge, mulching.

6.2 SAFETY CHECKS

Lists essential safety checks to perform before each use of the machine.

6.3 USING ON SLOPES

Provides crucial safety advice for operating the machine on sloped terrain.

6.4 START-UP

Step-by-step guide for starting the machine's engine.

6.5 OPERATION

Covers basic machine operation, including forward movement and braking.

6.5.4 Grass cutting

Details the procedure for cutting grass, including speed and height adjustments.

6.5.6 Emptying the grass catcher (for rear collection models only)

6.6 STOP

Provides instructions on how to properly stop the machine.

7. ROUTINE MAINTENANCE

7.2 REFUELLING/EMPTYING THE FUEL TANK

Details procedures and precautions for refueling and emptying the fuel tank.

7.3 CHECK, TOP UP, DRAINING OF ENGINE OIL

Explains how to check, top up, and drain the engine oil.

7.6 CLEANING

8. EXTRAORDINARY MAINTENANCE

8.1 SAFETY RECOMMENDATIONS

Advises contacting authorized service for specific malfunctions.

8.2 CUTTING DEVICE ASSEMBLY

8.2.2 Cutting device

8.3 REPLACING FRONT/REAR WHEELS

Provides steps for preparing and changing the machine's wheels.

8.3.4 Changing the wheel

8.5 REPLACING A FUSE

10. HANDLING AND TRANSPORTATION

11. ASSISTANCE AND REPAIRS

13. MAINTENANCE TABLE

14. PROBLEM IDENTIFICATION

15. ATTACHMENTS

Related product manuals

Stiga TC 102 Series User Manual

Table of Contents