designed to match the product and meet the
requirements of the user.
The deflector provided with the edger may not
protect the operator from all foreign objects
(gravel, glass, wire etc.) thrown by the revolving
blades. Ejected objects may also ricochet and
strike the operator.
Never attempt to modify your power tool in any
way since this may increase the risk of personal
injury. STIHL excludes all liability for personal
injury and damage to property caused while
using unauthorized attachments.
Do not use a high-pressure washer to clean the
power tool. The solid jet of water may damage
parts of the unit.
3.1 Clothing and Equipment
Wear proper protective clothing and equipment.
Clothing must be sturdy but allow
complete freedom of movement.
Wear close-fitting clothes such as a
boiler suit, not a loose jacket.
Do not wear clothing which could become trap‐
ped in wood, brush or moving parts of the
machine. Do not wear a scarf, necktie or jewelry.
Tie up and secure long hair above your should‐
ers.
Wear safety boots with steel toe caps
and non-slip soles.
WARNING
To reduce the risk of eye injuries,
wear close-fitting safety glasses in
accordance with European Standard
EN 166 (for Canada, in accordance
with standard CSA Z94). Make sure
the safety glasses fit snugly.
Wear "personal" sound protection, e.g. ear
defenders.
Wear face protection and make sure it fits well.
Face protection alone is not sufficient to protect
the eyes.
Wear sturdy protective gloves made
of a resistant material (e.g. leather).
STIHL offers a comprehensive range of personal
protective equipment.
3.2 Transporting the machine
Always stop the engine.
Carry the machine by the shaft so that it is bal‐
anced - the cutting attachment should face for‐
wards.
Do not touch hot parts of the machine – risk of
burn injury!
By vehicle: When transporting in a vehicle, prop‐
erly secure your machine to prevent turnover,
damage and fuel spillage.
3.3 Before starting
Check that your power tool is in safe operating
condition – refer to appropriate chapters in the
User Manuals for KombiEngines and Kombi‐
Tools:
–
Blades: correctly and securely mounted and in
good condition (clean, move freely, not war‐
ped)
–
Inspect the deflectors for damage and wear.
Do not use the machine with a damaged
deflector – replace damaged parts
–
Do not attempt to modify the controls or safety
devices in any way – only work with the deflec‐
tor fitted
–
Keep the handles dry and clean – free from oil
and dirt – this is important for safe control of
the machine.
–
Adjust the harness and handle(s) to suit your
height and reach.
3 Safety Precautions and Working Techniques English
0458-471-0121-C 3
To Next Page
Loading...
Need help?
General
