The power tool must only be operated when it is
in good operating condition – Risk of accident!
To prepare for emergencies when using a har‐
ness: Practice setting down the machine quickly.
To avoid damage, do not throw the unit to the
ground when practicing.
3.4 Holding and Guiding the Tool
Make sure you always have a firm and secure
footing.
Always hold the power tool firmly with both
hands on the handles.
3.4.1 For versions with loop handle
For versions with loop handle and loop handle
with barrier bar, left hand on the loop handle,
right hand on the control handle – even if you are
left-handed.
3.4.2 For versions with bike handle
Right hand on control handle, left hand on grip
on handlebar.
3.5 While Working
In the event of impending danger or in an emer‐
gency, switch off the engine immediately by mov‐
ing the slide control / stop switch/button to
0 or STOP.
There is a risk of accident from ejected objects
within a wide area around the working space, so
you must ensure that there is no-one within a
15 m radius of the machine. This distance must
also be maintained in relation to objects (vehi‐
cles, window panes) – risk of property damage!
Even at distances beyond 15 m, the danger can‐
not be ruled out.
Avoid contact with the blade – risk of
injury!
Check for correct idling, so that the blade stops
moving when the throttle trigger is released.
Check and correct the idle speed setting at regu‐
lar intervals. If the blade still rotates when the
engine is idling, have a dealer repair the machine
– see User Manual for KombiEngines.
Never work without deflector suitable
for the respective machine and cut‐
ting tool – risk of injury from ejected
objects!
The gear head becomes hot during
operation. Do not touch the gear
housing – risk of burns!
Take special care in slippery conditions – damp,
snow, ice, on slopes or uneven ground!
Watch out for obstacles: Tree stumps, roots –
risk of tripping or stumbling!
Check the work site – rocks, metal
objects etc. could get caught up and
ejected – potentially beyond a dis‐
tance of 15 m – risk of injury! Such
objects can also damage the cutting
attachment and other property (e.g.
parked vehicles, windows).
Do not work in the area above or
directly below the ground surface
where cables or cords have been laid
– risk of electrical shock! Touching
and damaging these lines with Kom‐
biTools could cause seriious or even
fatal injury.
Make sure you always have a firm and secure
footing.
English 3 Safety Precautions and Working Techniques
4 0458-471-0121-C
To Next Page
Loading...
Need help?
General
