HT-KM
English
27
Maintenance and Care
The following intervals apply to normal operating conditions only. If your daily work-
ing time is longer or operating conditions are difficult (very dusty work area, resin-
rich wood, tropical wood, etc.), shorten the specified intervals accordingly. If you only
use the saw occasionally, extend the intervals accordingly.
before starting work
after finishing work or daily
after each refueling stop
weekly
monthly
every 12 months
if problem
if damaged
if required
All accessible screws and nuts (not adjust-
ing screws)
Retighten X
Chain lubrication Check X
Saw chain
Inspect, also check sharpness XX
Check chain tension XX
Sharpen X
Guide bar
Check (wear, damage) X
Clean and turn over XX
Deburr X
Replace XX
Chain sprocket
Check X
Have replaced by dealer
1)
X
Safety labels Replace X
1)
STIHL recommends a STIHL servicing dealer.
To Next Page
Loading...
Need help?
General
