HT-KM
English
29
Definitions
1 Oilomatic Saw Chain
A loop consisting of cutters, tie
straps and drive links.
2 Guide Bar
Supports and guides the saw chain.
3 Oil Tank
Tank for chain lubricating oil.
4 Oil Filler Cap
For closing the oil tank.
5 Drive Tube
Encloses and protects the drive
shaft between the coupling sleeve
and gearbox.
6 Chain Sprocket Cover
Covers the sprocket.
7Hook
For hooking machine to a branch
and pulling branches away.
8 Chain Guard (Scabbard)
To protect the operator from
touching the chain.
9 Chain Sprocket
The toothed wheel that drives the
saw chain.
10 Chain Tensioner
Permits precise adjustment of chain
tension.
11 Sleeve
Locates drive tube in coupling
sleeve.
12 Handle Hose
For holding and controlling the unit
with the hand during operation.
Chain Lubrication
Fully automatic, speed-controlled oil
pump with rotary piston
Weight
Cutting attachments
Rollomatic E Mini guide bar
Actual cutting length will be less than
listed bar length.
Rollomatic E Mini Light guide bars
Actual cutting length will be less than
listed bar length.
Saw chain 3/8" P
Chain sprocket
Since new bar/chain combinations may
be developed after publication of this
Manual, ask your STIHL dealer for the
latest STIHL recommendations.
Specifications
Oil tank capacity: 0.22 l (7.4 fl.oz)
Cutting attachment
with drive tube: 1.8 kg (4.2 lbs)
Reduced kickback STIHL guide bars
(with green label)
Bar lengths: 30 cm (12 in.)
Pitch: 3/8" P (9.32 mm)
Groove width: 1.1 mm (0.043 in.)
Reduced kickback STIHL guide bars
(with green label)
Bar lengths: 25, 30 cm (10, 12 in.)
Pitch: 3/8" P (9.32 mm)
Groove width: 1.1 mm (0.043 in.)
Low kickback STIHL saw chain (with
green label)
Picco Micro Mini 3 (61 PMM3)
Type 3610
Pitch: 3/8" P (9.32 mm)
Drive link gauge: 1.1 mm (0.043 in.)
6-tooth for 3/8" P
7-tooth for 3/8" P
To Next Page
Loading...
Need help?
General
