Original Instruction ManualPrinted on chlorine-free paper
Printing inks contain vegetable oils, paper can be recycled.
© ANDREAS STIHL AG & Co. KG, 2015
0458-473-8621-B. VA0.C15.
0000000494_005_GB
HT-KM
English
1
{
This instruction manual is protected by copyright. All rights reserved, especially the rights to reproduce, translate and process
with electronic systems.
Contents
Allow only persons who fully understand
the manuals of the KombiEngine and
pole pruner KombiTool to operate this
power tool combination.
To receive maximum performance and
satisfaction from your STIHL
KombiTool, it is important that you read,
understand and follow the safety
precautions and the operating and
maintenance instructions in chapter
"Safety Precautions and Working
Techniques" before using your
KombiTool. For further information you
can go to www.stihlusa.com.
Contact your STIHL dealer or the STIHL
distributor for your area if you do not
understand any of the instructions in the
two manuals.
WARNING
Because a KombiEngine equipped with
a pole pruner KombiTool has a high-
speed cutting attachment some special
safety precautions must be observed to
reduce the risk of personal injury.
Careless or improper use may cause
serious or even fatal injury.
KombiSystem 2
Guide to Using this Manual 2
Safety Precautions and Working
Techniques 3
Using the Unit 10
Approved KombiEngines 12
Assembling the Unit 13
Mounting the KombiTool 14
Cutting Attachment 14
Mounting the Bar and Chain 15
Tensioning the Chain 16
Checking Chain Tension 16
Chain Lubricant 16
Filling Chain Oil Tank 17
Checking Chain Lubrication 19
Fitting the Harness 19
Starting / Stopping the Engine 20
Operating Instructions 21
Storing the Machine 21
Taking Care of the Guide Bar 22
Checking and Replacing the Chain
Sprocket 22
Maintaining and Sharpening the
Saw Chain 23
Maintenance and Care 27
Main Parts 28
Specifications 29
Maintenance and Repairs 30
Disposal 30
Trademarks 30
To Next Page
Loading...
Need help?
General
