Stihl MSE 141 C User Manual

0458-729-8621-A
50
English 23 Combinations of Guide Bars and Saw Chains
23.1 STIHL MSE 141 C
23 Combinations of Guide Bars and Saw Chains
Pitch Drive link gauge/
Groove width
Length Guide Bar Number of teeth
of sprocket
Drive link
count
Saw chain
1/4" P
0.043 in.
(1.1 mm)
10 in. (25 cm)
Rollomatic E Mini 8
56
71 PM3 (Type 3670)12 in. (30 cm) 64
14 in. (35 cm) 72
3/8" P
0.043 in.
(1.1 mm)
12 in. (30 cm)
Rollomatic E Mini 7
45
61 PMM3
(Type 3610)
14 in. (35 cm) 50
16 in. (40 cm) 55
The guide bar and saw chain combinations listed above meet the 45° computed kickback angle requirement
of UL 60745-2-13 (for Canada: CSA Z 62.3) when used on this model chain saw with the matching chain sprocket listed
above.
Use replacement guide bars or saw chains only as listed above or as listed elsewhere by STIHL as conforming with the 45°
computed kickback angle requirement of UL 60745-2-13 (for Canada: CSA Z 62.3) when used on this model chain saw.
The listed guide bars are green-labeled reduced kickback STIHL guide bars. The listed saw chains are green-labeled low
kickback STIHL saw chains.
Since new bar/chain combinations may be developed after publication of this manual, ask your authorized STIHL servicing
dealer for the latest STIHL recommendations.

Stihl MSE 141 C Specifications

General

Brand	Stihl
Model	MSE 141 C
Category	Chainsaw
Language	English