Stihl Mse 210 c User Manual

MSE 170 C, MSE 190 C, MSE 210 C, MSE 230 C
English
23
Preparations
N Thoroughly clean the oil filler cap (1)
and the area around it to ensure that
no dirt falls into the tank.
N Position the machine so that the
filler cap faces up.
Opening the filler cap
N Raise the grip until it is upright.
N Turn the cap counterclockwise
(about a quarter turn).
Marks on filler cap and oil tank must line
up.
N Remove the cap.
Filling up with chain oil
Take care not to spill chain oil while
refilling and do not overfill the tank.
STIHL recommends you use the STIHL
filler nozzle for chain oil (special
accessory).
N Fill up with chain oil.
Closing the filler cap
Grip must be vertical:
N Fit the cap – marks on filler cap and
oil tank must line up.
N Press the cap down as far as stop.
N While holding the cap depressed,
turn it clockwise until it engages in
position.
The marks on the filler cap and oil tank
are then in alignment.
Filling Chain Oil Tank
9931BA039 KN
1
001BA236 KN
001BA251 KN
001BA252 KN
001BA237 KN
001BA252 KN
001BA253 KN
001BA254 KN

Stihl Mse 210 c Specifications

General

Brand	Stihl
Model	Mse 210 c
Category	Chainsaw
Language	English