Stihl Mse 210 c User Manual

MSE 170 C, MSE 190 C, MSE 210 C, MSE 230 C
English
27
N Make sure you have a secure and
balanced footing.
N Check that bystanders are well clear
of the general work area of the
power tool.
N Hold the power tool firmly with both
hands on the handles.
N Check that the saw chain chain is
not touching the wood or any other
object.
N Pull the hand guard towards the
front handle until there is an audible
click and it is in position ‚ – the
chain brake is disengaged.
N Depress the trigger switch
lockout (1) with your thumb.
N Squeeze the trigger switch (2) with
your index finger.
N Start the cut with the chain running.
The motor runs only if the hand guard is
on ‚ and the trigger switch lockout (1)
and trigger switch (2) are operated
simultaneously.
N Release the trigger switch (2) so
that it can return to the off position.
It is locked in this position by the
trigger switch lockout (1).
The coasting brake brings the chain to a
standstill.
WARNING
The coasting brake operates
immediately only if the trigger switch is
fully released. If you release the trigger
switch slowly or only partly, the saw
chain will continue to run for several
seconds.
N Move hand guard to ƒ – the chain
is locked.
During longer work breaks – disconnect
the plug from the wall outlet.
Switching On
9931BA015 KN
1
2
9931BA004 KN
Switching Off
1
2
9931BA033 KN
9931BA003 KN

Stihl Mse 210 c Specifications

General

Brand	Stihl
Model	Mse 210 c
Category	Chainsaw
Language	English