Stihl Mse 210 c User Manual

MSE 170 C, MSE 190 C, MSE 210 C, MSE 230 C
English
41
MSE 210 C and MSE 230 C
Noise and Vibration Data
Noise data is determined on the basis of
the rated maximum speed.
Vibration data is determined on the
basis of the full load operating mode.
For further details on compliance with
Vibration Directive 2002/44/EC see
www.stihl.com/vib.
Sound pressure level L
p
to
EN 60745
-
2
-
13
Sound power level L
w
to EN 60745
-
2
-
13
Vibration measurement a
hv
to
EN 60745
-
2
-
13
For the sound pressure level and the
sound power level, the K
-
factor in
accordance with Directive 2006/42/EC =
1.5 dB(A); for the vibration level, the
K
-
factor in accordance with
Directive 2006/42/EC = 2.0 m/s
2
.
The vibration values quoted above have
been measured according to a
standardized test procedure and may be
used to compare electric power tools.
Depending on the type of usage, the
vibrations that actually occur may differ
from the values quoted.
The vibration values quoted may be
used for an initial assessment of the
user's exposure to vibrations.
The actual exposure to vibrations has to
be evaluated. This process may also
take into account times during which the
electric power tool is switched off and
times during which it is switched on but
running without load.
Observe measures to reduce vibration
exposure to protect the user – see
section on "Vibrations" in chapter on
"Safety Precautions and Working
Techniques".
REACH
REACH is an EC regulation and stands
for the Registration, Evaluation,
Authorisation and Restriction of
Chemical substances.
For information on compliance with the
REACH regulation (EC) No. 1907/2006
see www.stihl.com/reach.
Please enter your saw model, serial
number as well as the part numbers of
the guide bar and saw chain in the
spaces provided. This will make re-
ordering simpler.
The guide bar and saw chain are subject
to normal wear and tear. When
purchasing these parts, always quote
the saw model, the part numbers and
names of the parts.
7-tooth for 3/8" P
8-tooth for 1/4"
MSE 170 C: 92 dB(A)
MSE 190 C: 92 dB(A)
MSE 210 C: 93 dB(A)
MSE 230 C: 93 dB(A)
MSE 170 C: 103 dB(A)
MSE 190 C: 103 dB(A)
MSE 210 C: 104 dB(A)
MSE 230 C: 104 dB(A)
Handle,
left
Handle,
right
MSE 170 C: 2.9 m/s
2
3.4 m/s
2
MSE 190 C: 2.9 m/s
2
3.4 m/s
2
MSE 210 C: 3.4 m/s
2
4.2 m/s
2
MSE 230 C: 3.4 m/s
2
4.2 m/s
2
Ordering Spare Parts
Model
Serial number
Guide bar part number
Chain part number

Stihl Mse 210 c Specifications

General

Brand	Stihl
Model	Mse 210 c
Category	Chainsaw
Language	English