Stihl RE 118 User Manual

RE 108, RE 118, RE 128 PLUS
English
32
After finishing work
– Unplug the power plug from the
socket
– Disconnect water intake hose
between machine and water supply
Never unplug the power plug by pulling
on the cord: always grip the plug itself.
Maintenance and repairs
WARNING
– Use only high-quality spare parts.
Otherwise, there may be a risk of
accidents or damage to the
machine. Contact a servicing dealer
if in doubt.
– To avoid risks, work on the machine
(e. g., power cord replacement)
may only be carried out by qualified
electricians.
Clean plastic parts with a cloth. Harsh
detergents can damage the plastic.
Cleaning ventilation slots in motor
housing as needed.
The machine must be serviced regularly.
Do not attempt any maintenance or
repair work not described in the
Instruction Manual. All other work should
be carried out by a servicing dealer.
STIHL recommends the use of genuine
STIHL spare parts. Such parts have
been optimized for the machine and the
user's requirements.
STIHL recommends that maintenance
and repair work be carried out only by
authorized STIHL dealers. STIHL
dealers receive regular training and are
supplied with technical information.
The following accessory parts must be
fitted before using the machine for the
first time.
Connector on water inlet
N Attach the connector (1) to the
water inlet and tighten it by hand
RE 108, 118
Handle
N Press the handle (1) onto the
telescopic shafts from above and
fasten it with the two bolts (2) and
nuts
Switch off the
machine before leav-
ing it!
Before starting any work
on the machine: Always
disconnect the machine
from the mains power
supply.
Assembling the Unit
650BA003 KN
1 1
2
650BA000 KN
1

Stihl RE 118 Specifications

General

Brand	Stihl
Model	RE 118
Category	Pressure Washer
Language	English