0458-620-0121-A
22
English
10 Switching the pressure washer on and off
► Place connecting cord (4) in the recess.
► Close flap (2).
► Plug the connecting cord (4) into a properly installed
socket.
10.1 Switching on the pressure washer
When the pressure washer is switched on, voltage
fluctuations may occur under unfavorable mains conditions
(power line impedance higher than 0.15 ohm). Such voltage
fluctuations may adversely affect other connected electrical
appliances.
► Turn the rotary switch to the I position.
10.2 Switching off the pressure washer
► Turn the rotary switch to the 0 position.
10 Switching the pressure washer on and
off
0000-GXX-4357-A0
0000-GXX-4358-A0