3.0 FIRST TIME INSTALLATION
After all connections have been made properly, switch on your TV. The First Time Setup menu will
appear on screen. Use pqt u to navigate in the menu:
OSD Language To select your OSD language.
Mode Setting Choose between Store Mode and Home Mode.
Country To select the country you prefer.
Tuner Type Choose between Antenna and Cable.
Auto Scan Select DTV to reach digital broadcasting, ATV to reach analogue broadcasting
or DTV+ATV to receive both.
LCN To switch On or Off numbering LCN.
Auto Channel Update Turn On if you want to activate this function.
Then, once you finished with the settings, select START at the end of the list and confirm with OK on your
remote control, the TV will start searching for channels.
3.1 Antenna/cable connection
To receive digital or analogue signals, your TV has to be connected to a terrestrial indoor or outdoor
antenna. Use the antenna cable to connect the antenna with the ANTENNA IN connector on the back of
your TV. Please ensure that a properly shielded antenna cable and suitable connectors are used.
3.2 Input source
Press SOURCE to display the input source list. Press pq to highlight the present options in the list: DTV
for digital terrestrial or cable transmissions (depending on which scan you have performed), ATV for
analogue transmissions, MEDIA for devices connected to USB input, AV, SCART, YPbPr, HDMI1, HDMI2,
HDMI3, PC for other connected devices. Confirm with OK.
4.0 MENU CONTROL
4.1 Picture
Press MENU to display the main menu, and press t u to select the submenus and then press OK to
enter.
Picture Mode
Press pq to select Picture Mode, then press t u to select. Available picture modes are: Standard, Mild,
Personal and Dynamic.
Brightness/Contrast/Sharpness/Saturation Hue
Press pq to select an option, then press t u to adjust.
Brightness Adjust the visual perception output of the entire picture, it will affect the
luminousness of the picture.
Contrast Adjust the highlight intensity of the picture, but the shadow of the picture is
invariable.
Sharpness Adjust the peaking in the detail of the picture.
Saturation Adjust the saturation of the colour based on your own like.
8
English
To Next Page
Loading...
Need help?
General
