Note For more information about Settings in this menu please refer to chapter 3
First Time Installation.
Restore Factory Default
Press p/q to select Reset, then press OK to enter the sub-menu.
If you are sure to reset, press Yes to reset.
Note: User data on this TV will be completely lost after operating this feature.
Software Upgrade (USB)
Connect a USB device with upgraded software to upgrade the TV system.
Software Version
Your current software version is displayed.
4.6.1 Time Settings
Press pq to select Time Settings, then press OK or u to enter the sub-menu.
OSD Time
Press pq to select OSD Time, press t u to select the duration time for displaying the info bar on
screen, available settings are: Off, 10seconds, 20seconds, 30seconds, 60seconds.
Sleep Timer
Set a timer for the TV to turn off automatically.
Press pq to select Sleep Timer, press t u to select. Available settings are: Off, 5 min, 15 min, 30 min, 60
min, 90 min, 120 min, 240 min.
Auto Sleep
Auto Sleep helps you reducing power consumption. When set to 3 Hours/4 Hours and 6
Hours, the receiver will switch to standby if it doesn’t receive any commands during this time. Set
Auto Sleep Off to deactivate the automatic standby function
Time Zone
Select your region to set the correct time.
Press pq to select Time Zone, then press OK or u to enter the sub-menu.
Use pq to select your country and consequently your time region then confirm with OK.
Time
When Auto Sync is set to On the TV will display the time provided by the broadcaster. If you choose to set
it to Off you will be free to set the time you prefer by changing Date and Time.
14
English
To Next Page
Loading...
Need help?
General
