Black plate (203,1)
北米Model "A8130BE-B" EDITED: 2007/ 7/ 25
Cargo area cover (if
equipped)
The cargo area cover is provided for
covering the cargo area and to protect its
contents from direct sunlight. This cover is
detachable to make room for additional
cargo.
& Using the cover
To extend the cover, pull the end of the
cover out of the housing, then insert its
hooks into the catches as shown. To
rewind it, unhook it from the catches and
it will rewind automatically. You should
hold on to the cover and guide it back into
the cover housing while it is rewinding.
WARNING
Do not place anything on the ex-
tended cover. Putting excessive
weight on the extended cover can
break it and an object on the cover
could tumble forward in the event of
a sudden stop or collision. This
could cause serious injury.
& To remove the cover housing
1. Rewind the cover.
2. To take the cover housing off the
retainer, lift it out.
3. Store the cover housing in the cargo
area.
& Stowage of the cover
On models having a temporary spare tire,
the cargo area cover can be stowed under
the cargo floor.
& To install the cover housing
To install the cover, insert both ends of the
cover housing into the retainers.
Interior equipment 6-13
6
To Next Page
Loading...
Need help?
General
