10
4
Mechanical Mounting
Respect all local standards and requirements during mechanical installation.
4.1 Requirements for installation environment
The protection level of the product is IP20, and the installation site shall meet the following
requirements:
• It should be installed in a shaded indoor location.
• The installation position of the product shall be determined after full consideration of its
overall dimensions and weight.
• Ambient temperature: 10℃-35℃， Ambient humidity: 10% ~80% (non-condensing),
Elevation: ≤4000m.
• It should be installed in a dry, well-ventilated and dustproof place.
• The installation site is free from explosive hazards and the surrounding media should not
contain media that can corrode metals, damage insulation and surface plating and
coating layers.
• The installation site should have no visible water vapour and no significant mould should
be present.
• The installation site does not exceed the vibration with severity class I as specified in
GB/T 11287-2000.
• In order to facilitate heat dissipation and daily maintenance, sufficient space should be
reserved around the product.
To Next Page
Loading...
Need help?
General
