28 GSF1200AK6/SAK6 (’06-MODEL)
ABS INDICATOR LIGHT INSPECTION
Step 1
1) Check if the ABS indicator light lights up when turning the
ignition switch to ON.
Does the ABS indicator light up?
The ABS indicator light lights up
Step 2
1) Ride the motorcycle at more than 10 km/h (6.2 mile/h).
Does the ABS indicator light go off?
The ABS indicator light does not light up
Step 3
1) Remove the left frame cover. (!GSF1200K6/SK6 9D-5)
2) Remove the fuse box
1 by removing the mounting bolt.
3) Open the fuse box and inspect the ignition fuse
2.
Ignition fuse: 15 A
Is the ignition fuse OK?
$
YES Go to step 2.
NO Go to step 3.
YES Normal (No DTC exists)
NO
DTC OUTPUT (!Page 32)
If DTC can not be output (the ABS indicator light
does not flash), go to step 7.
YES Go to step 4.
NO Replace the ignition fuse.
If a fuse is blown, find the cause of the problem and
correct it before replacing the fuse.
SAMPLE
To Next Page
Loading...
Need help?
General
