32 GSF1200AK6/SAK6 (’06-MODEL)
DTC (Diagnostic Trouble Code) OUTPUT
Connect the special tool to the mode select coupler to output the
memorized DTCs on the ABS indicator light.
• Turn the ignition switch to OFF.
• Remove the right frame cover. (!GSF1200K6/SK6 9D-5)
• Connect the special tool to the mode select coupler
1
(Orange – B/W).
" 09930-82710: Mode select switch
• Switch the special tool to ON.
• Turn the ignition switch to ON.
The ABS indicator light starts flashing to indicate the DTC.
NOTE:
* If there is a DTC, the ABS indicator light keeps flashing cyclic
and repeatedly.
* If there is no DTC, the ABS indicator light keeps lighting on.
* If the DTCs are to be output for a long time, remove the
HEAD-LO fuse in order to prevent the battery from discharg-
ing.
SAMPLE
To Next Page
Loading...
Need help?
General
