EasyManuals Logo

Suzuki DL1000A 2018 User Manual

Suzuki DL1000A 2018
161 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #100 background imageLoading...
Page #100 background image
7-25
11.Start the engine (while the
motorcycle is outside on level
ground) and allow it to idle for
three minutes.
12.Turn the engine off and wait
approximately three minutes.
Recheck the oil level on the
engine oil inspection window
while holding the motorcycle
vertically. If it is lower than the
“L” line, add oil until the oil level
is between the “L” line and the
“F” line. Inspect the area
around the drain plug and oil
filter for leaks.
NOTE: If you do not have a proper
oil filter wrench, have your Suzuki
dealer perform this service.
ENGINE IDLE SPEED
INSPECTION
Inspect the engine idle speed.
The engine idle speed should be
1200 – 1400 r/min when the
engine is warm.
NOTE: If the engine idle speed is
not within the specified range, ask
your Suzuki dealer or a qualified
mechanic to inspect and repair
the motorcycle.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Suzuki DL1000A 2018 and is the answer not in the manual?

Suzuki DL1000A 2018 Specifications

General IconGeneral
BrandSuzuki
ModelDL1000A 2018
CategoryMotorcycle
LanguageEnglish

Related product manuals