2-45
BEFORE DRIVING
73SB7-01E
Child restraint system for
countries applied for UN
Regulation No.16–06
73SB02060
The vehicle complies with UN Regulation
No. 16–06, if one of the above image is
shown on the information display in the
instrument cluster (with tachometer) for
several seconds when the ignition switch is
turned to “ON” position or the engine
switch is pressed to change the ignition
mode to ON.
CAUTION
Adjust the height of the rear head
restraint or remove it for fitting the
child restraint, as necessary. How-
ever, if a booster cushion not
equipped with the head restraint is
fitted, the rear seat head restraint
should not be removed. If the rear
head restraint is removed for fitting
the child restraint, you need to install
it again after removing the child
restraint.
If the child restraint is fitted improp-
erly, a child sitting in it could be
injured in a collision. (Refer to
“Installation with lap-shoulder seat
belts” section, “Installation with ISO-
FIX type anchorages” section and
“Installation of child restraint with
top tether” section in this section for
details.)
To Next Page
Loading...
Need help?
General
