DISASSEMBLY AND ASSEMBLY 4-63
BRAKE FLUID REPLACEMENT
• Remove the reservoir cap. (4-61)
• Suck up the brake fluid as much as possible.
• Drain the old brake fluid as much as possible.
• Fill the reservoir with new brake fluid.
• Connect a transparent tube to the bleeder valve and set the
other end into a receptacle.
• Loosen the bleeder valve and pump the brake lever/pedal
until old brake fluid is completely out of the brake system.
• Bleed air from the brake system. (4-61)
To Next Page
Loading...
Need help?
General
