10
2.5) REPAIR AND MAINTENANCE
DANGER
When machine repair is needed, it shall be conducted by SunStar A/S engineers only
who have finished the due training course.
1) For cleaning and repair, cut the main power supply. Wait for 4 minutes before starting
maintenance to make the machine completely discharged.
2) Do not modify the machine specifications or parts without substantial consultations
with SunStar. Otherwise, it may threaten safety during machine operation.
3) Use the parts manufactured by SunStar to repair or replace the machine parts during
A/S service.
4) When repairing is completed, re-install all the removed safety covers.
For main shaft motor and X,Y drive box, it takes 10 minutes
before they are completely discharged after the main power is
cut.
CAUTION
To Next Page
Loading...
Need help?
General
