Swift MAJOR MJ70-190 User Manual

www.major-equipment.com
2
Product Specications
Model Overall
Width
Working
Width
Transport
Width
Power
(HP)
PTO rpm Cutting
Height
(mm)
Rotors/
Blades
Weight
(kg)
Blade
tip
speed
(m/s)
Mowing
Rates
(Acres/hr
at 7mph)
MJ70-190 2.0m (6' 6") 1.9m (6' 3") 2.00m (6' 6") 25-70 540 10-150 3/6 465 75 5.3
MJ70-240 2.5m (8' 2") 2.40m (8') 2.50m (8' 2") 30-80 540 10-150 4/8 570 75 6.7
MJ70-320/
MJ70-320FM
3.3m (11' 4") 3.2m (11') 2.3m (7' 6") 40-90 540/1000 10-150 5/10 925/905 90 8.9
MJ70-410/
MJ70-410FM
4.2m (13' 9") 4.1m (13' 5") 2.0m (6' 6") 50-100 540/1000 10-150 6/12 1130/1100 90 11.5
MJ70-550 5.6m (18' 4") 5.5m (18') 2.0m (6' 6") 70-120 540 10-150 8/16 1310 90 15.4
MJ70-410T 4.2m (13' 9") 4.1m (13' 5") 2.0m (6' 6") 50-100 540 10-150 6/12 1390 90 11.5
MJ70-550T 5.6m (18' 4") 5.50m (18') 2.0m (6' 6") 70-120 540 10-150 8/16 1585 90 15.4
To avoid injury, read the manual Check the tightness of the transmission
Rotating blade hazard
PTO entanglement
hazard - keep clear
of PTO drives.
Safety
Machine Safety Labels
The machine safety labels shown in this section are placed in important areas on your machine to draw attention to
potential safety hazards.
On your machine safety labels, the words DANGER, WARNING, and CAUTION are used with this safety alert symbol.
DANGER identies the most serious hazards.
The operator’s manual also explains any potential safety hazards whenever necessary in special safety messages that
are identied with the word, CAUTION, and the safety-alert symbol .
Grease points
Shaft alignment
High oil pressure
hazard
Moving parts
Maximum speed

Swift MAJOR MJ70-190 Specifications

General

Brand	Swift
Model	MAJOR MJ70-190
Category	Farm Equipment
Language	English