SYMEO LPR-1D24 User Manual

SYMEO Local Positioning Radar System
LPR®-1D24
LPR®-1D24 Station – Overview and Mounting
Web User Interface for LPR®-1D24
Copyright © SYMEO GmbH 2015
LPR-1D24_Users_Manual_FCC-IC-Edition_EN.docx Page 19 of 34
Figure 8: Network Settings
 Enter the following fixed
IP-address i.e.
192.168.1.1. The subnet
mask should be set to
255.255.255.0.
 Click in both windows OK.
If the firewall settings are too restrictive, you may not get access to the
LPR
®
-1D24 unit. In this case deactivate the firewall temporarily.
The LPR
®
unit should be available via your PC now. You can check the connection with a
ping to the LPR
®
-1D24 unit:
Open the Command-Window:
1. Push the Windows Start Button
2. Choose Run
3. Enter cmd and click OK
4. Enter in the cmd.exe window: ping 192.168.1.99 or the IP-address of the LPR
®
-1D24
unit.
Figure 9: Ping LPR
®
-1D24 unit
The LPR
®
-1D24 unit should answer with a Reply.

SYMEO LPR-1D24 Specifications

General

Brand	SYMEO
Model	LPR-1D24
Category	Measuring Instruments
Language	English