SYMEO Local Positioning Radar System
LPR®-1D24
LPR®-1D24 Station – Overview and Mounting
Web User Interface for LPR®-1D24
Copyright © SYMEO GmbH 2015
LPR-1D24_Users_Manual_FCC-IC-Edition_EN.docx Page 25 of 34
Following message appears in the upper left corner “Saved successfully” (see picture below).
Furthermore it will be shown in green, what has been saved (in the picture below the
hostname). Now you need to press “Commit” if you want to apply the change. The unit will
perform a reboot to apply it. If you want to discard the change, press “Reset”.
Figure 16 – Device: Device Configuration LAN Settings - Commit the change
If the changes are applied successfully, it will be indicated in the upper left corner of the web
page.
Figure 17 – Device: Device Configuration LAN Settings - Changes have been applied
All changes always have to be saved and confirmed. Only then the
changes are applied on the unit.
To Next Page
Loading...
Need help?
General
