EasyManuals Logo
Home>SystemAir>Fan>DVS series

SystemAir DVS series User Manual

SystemAir DVS series
28 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #23 background imageLoading...
Page #23 background image
Cleaning |
19
Activities cont'd
Check the vibration dampers (if used) are working
correctly and check for visible damage and corrosion.
X
See normal operating
conditions
Check the electrical and mechanical protective equipment
is working correctly.
X
See normal operating
conditions
Check the fan’s rating plate is legible.
X X
Check the connection clamps and screwed cable
connections for damage/defects, and check that they are
firmly seated.
X
See normal operating
conditions
Check the flexible connectors for damage.
X
See normal operating
conditions
Note:
For all other damage/defects, please contact Systemair. Defective safety-relevant fans (for Ex and smoke
extraction applications) must be replaced completely.
12.3 Spare parts
Use original spare parts from Systemair only.
When ordering spare parts, please specify the serial number of the fan. This can be found on the name plate.
13 Cleaning
Safety information
Cleaning may only be carried out by adequately qualified persons, details see Table 1 Qualifications, page 2.
Observe the 5 rules of electrical safety, see 2.3 5 rules of electrical safety, page 2.
The impeller must be at a standstill.
Procedure
Important
Keeping the fan clean extends its service life.
Install a filter monitor.
Do not use steel brushes or sharp-edged objects.
Do not use a high-pressure cleaner (steam jet cleaner) under any circumstances.
Do not bend the fan blades when cleaning.
When cleaning the impeller, pay attention to balance weights that have been positioned
Keep the airways of the fan clear and clean them if necessary with a brush.
14 Deinstallation/dismantling
Deinstall and dismantle the fan in reverse order of installation and electrical connection.
15 Disposal
Ensure material is recycled. Observe national regulations.
The device and the transport packaging are predominantly made from recyclable raw materials.
Disassemble the fan into its components.
Separate the parts according to:
reusable material
material groups to be disposed of (metal, plastics, electrical parts, etc.)
| 005

Other manuals for SystemAir DVS series

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the SystemAir DVS series and is the answer not in the manual?

SystemAir DVS series Specifications

General IconGeneral
BrandSystemAir
ModelDVS series
CategoryFan
LanguageEnglish

Related product manuals