T2004 Multi-Control Head System Manual System Operation 21
© Tait Electronics Limited May 2004
4 System Operation
The primary control head provides the same user functionality as the
original T2020/T2040 control head, including the On/Off power control
to the entire multi-head system.
The Secondary control heads have the same functionality except for the
On/Off power control. The power switch is disabled in the Secondary
heads, because only one control head (Primary) can provide system power
On/Off control.
Secondary control heads can not be individually powered off.
Note The DC plug pack for the Secondary head should be connected
to a 24-hour mains outlet in order for the Secondary heads to
always function correctly. Display errors will occur if power is
removed and replaced without resetting the radio via the Primary
head. Secondary heads have a programmed delay of 10 seconds
from initial power on, where key presses will not be actioned.
To Next Page
Loading...
Need help?
General
