Tait T2000 Series User Manual

T2004 Multi-Control Head System Manual Part B T2004 Control Heads 65
May 2004 © Tait Electronics Ltd
5 X2AM01 Multi-Head Radio Interface PCB
This section contains all PCB information for the Multi-Head interface PCB.
The following information is included for the board:
■ PCB parts list
■ Grid references
■ PCB layout drawings for both sides of the board
■ Circuit diagram.

Tait T2000 Series Specifications

General

IP Rating	IP54
Operating Temperature Range	-30°C to +60°C
Channel Spacing	12.5 kHz, 25 kHz
Number of Channels	Up to 256
Receiver Sensitivity	0.25μV for 12dB SINAD
Signalling	DTMF

Summary

Part A System Information

System Overview

Describes the overall system structure and components of the T2004 Multi-Control Head.

System Installation

Details the process for installing the T2004 Multi-Control Head system.

System Operation

Explains how to operate the T2004 Multi-Control Head system.

System Equipment Specifications

Lists and describes the specifications of the equipment used in the system.

System Testing

System Fault Finding

Provides guidance on troubleshooting common problems with the system.

Part B T2004 Control Heads

Circuit Description for Control Heads

Functionality of Control Heads

Control Head I/O Connections

Testing X2H2xx Control Heads

Outlines the procedures and test equipment for testing the X2H2xx control heads.

Part C X2AM01 Radio Interface

Circuit Description for X2AM01 Interface

X2AM01 Interface I/O Connections

Testing the X2AM01 Radio Interface

Outlines the procedures and test equipment for testing the X2AM01 radio interface.