Tait T850 II Series User Manual

M850-00 T855 General Information B1.13
Copyright TEL 31/09/98
1.4 Standard Product Range
The following table lists the range of standard T855 types (i.e. no options fitted) availa-
ble at the time this manual was published. Consult your nearest Tait Dealer or Cus-
tomer Service Organisation for more information.
You can identify the receiver type by checking the product code printed on a label on
the rear of the chassis (Figure 1.1 in Part A shows typical labels). You can further verify
the receiver type by checking the placement of an SMD resistor in the table that is screen
printed onto the PCB (refer to Section 6.1 for more details).
Frequency Range (MHz) 400-440
IF Bandwidth (kHz) 7.5 12 15
TCXO ±1ppm -20°C to +60°C
•••
Receiver Type: T855- 15-0000 13-0000 10-0000
Frequency Range (MHz) 440-480
IF Bandwidth (kHz) 7.5 12 15
TCXO ±1ppm -20°C to +60°C
•••
Receiver Type: T855- 25-0000 23-0000 20-0000
Frequency Range (MHz) 480-530
IF Bandwidth (kHz) 7.5 15
TCXO ±1ppm -20°C to +60°C
••
Receiver Type: T855- 35-0000 30-0000

Tait T850 II Series Specifications

General

Brand	Tait
Model	T850 II Series
Category	Accessories
Language	English