88 P25 services
If an acknowledgement is not received from the
recipient’s radio, you will have the option of either
canceling or resending the request.
Radio unit monitor
This feature is controlled by a software license
(SFE) and may not be available with your radio.
This software license is only required for the
radio that sends the radio unit monitor request.
The receiving radio does not need the software
license.
This feature is only available for digital channels
operating in conventional mode, and for radios
configured for dispatcher operation.
The radio unit monitor feature can be used when you
are concerned about the safety of a radio user on your
system. When you send a radio-unit monitor request
to a radio, it calls you back without giving any
indication that it is making a call. You can hear any
activity near the radio for up to 20 seconds.
Sending a radio unit monitor request
1 Press Menu and select Services >
Radio monitor.
2 Scroll to the radio you want to monitor.
3 Press Send to.
The red LED glows and a message appears in the
display.
Radio monitor
Car 2
Car 3
Send toCancel
Sending
R.U.M to
Car 2
Cancel
To Next Page
Loading...
Need help?
General
