10
Version for USA and Canada of the
electrical connection
Connect to a properly gounded outlet only.
Grounding Instructions
Warning
This machine must be properly grounded to
protect the operator from electical shock.
Read the safety instructions below befor
operating this machine.
120 Volt machines have this kind of three-
prong plug at the end of a three-wire electical
cord. The grounding pin on this plug grounds
the machine when it is pluged into a three-
prong outlet.
A grounding adaptor must be installed as
shown here if only two prong outlets are
available. The outlet box must be groundend
and the grounding tab (or wire) must be
installed under the head of screw in the
center of the outlet cover. 120 Volt plugs are
available at most hardwear stores. Grounding
adaptors are not aproved for use in Canada.
- Replace the plug if the grounding pin is
damaged or broken
The green (or green/yellow) wire in the cord is
the grounding wire. When replacing a plug,
this wire must be attached to the grounding
pin only.
UK only:
Electrical connections
The flexible cord fitted to this machine is of 3
core construction for use with a 3-pin plug.
For your convenience a 13-amp plug
conforming to BS1363 has been fitted. This
machine must be fused at 10 amps. If you
need to change the plug, the correct wiring is
set out below.
Green and yellow wire to terminal marked ” E
” or with the ”Earth–Symbol” or coloured
green, or green and yellow.
Blue wire to terminal marked ”N” or coloured
black.
120 Volt plug
Groundet pin
Groundet outlet
120 Volt plug
Groundet outlet box
Metal
screw
Tab for grounding
screw
Ungrounded
outlet
To Next Page
Loading...
Need help?
General
