TC-Helicon VoiceTone Harmony-G User Manual

My guitar doesn’t change the harmonies.What’s
wrong?
o Turn up the volume control on your guitar.
o Confirm your guitar cable is good by connecting
your guitar directly to your amp.
o Remove any guitar effect pedals between your
guitar and Harmony-G’s input.
o Ensure that you are playing guitar chords made up
of at least a root note and a major or minor third.
o Ensure the Manual button is off
My guitar volume is changing when I sing, can I
adjust it manually?
o Adjust the Guitar level control so that it is above
or below the center Auto position.
My guitar is connected to my amp but I can’t
hear it.What’s wrong?
o Press the On footswitch to exit Bypass/Tuner
mode
My FX level is up but the sound is still dry
o You’re likely set to the Off FX style. Press the FX
button to activate and cycle through the FX styles.
I want to talk to the audience with no FX on,
how do I do that?
o Hold the On footswitch to enter Bypass/Tuner
mode.
Where can I find support for this product?
o Point your browser to www.tc-helicon.com. On
our webpage, you’ll find links to our support site
and support contact information.
Can I turn the harmonies off in a preset?
Yes, press either the Voice 1 or Voice 2 buttons so that
the LEDs above them are not lit.
FAQ and Troubleshooting
23

TC-Helicon VoiceTone Harmony-G Specifications

Analog Inputs

mic input impedance	1 kOhm
mic input sensitivity at 0dBFS	-44 dBu to +2 dBu
mic input sensitivity at 12dB headroom	-56 dBu to -10 dBu
guitar input impedance	1 MOhm
guitar input sensitivity	+15 dBu at 0dBFS
equivalent input noise	-126 dBu at max. mic amp gain, Rg = 150 Ohm

Analog Outputs

main output impedance	40 Ohm
main output level	+2 dBu at 0dBFS
guitar thru output impedance	270 Ohm

Input to Output Analog Audio Performance

dynamic range, mic at min gain	>108 dB, 20 Hz - 20 kHz A-weighted
dynamic range, mic at -18 dBu sensitivity	>104 dB, 20 Hz - 20 kHz
thd+ noise, mic at min gain	<-90 dB
frequency response at max gain	-1.5 dB at 40 Hz, +0/-0.3 dB (200 Hz to 20 kHz)
guitar in to thru dynamic range	>119 dB
tuning mute attenuation	>100 dB

Conversion Characteristics

sample rate	48 kHz
converter	AKM AK4620B
ad / da conversion	24 bit, 128x oversampling

Operating Environment

operating temperature	32 °F to 122 °F (0 °C to 50 °C)
storage temperature	-22 °F to 167 °F (-30 °C to 70 °C)
humidity	Max. 90 % non-condensing

Weight and Dimensions

dimensions	130 mm x 132 mm x 41 mm (5" x 5.25" x 1.5")
weight	1.5 lb (0.72 kg)