Name: TC-Helicon VoiceTone Harmony-G
Brand: TC-Helicon
Rating: 4 (1 reviews)

To Next Page

To Previous Page

3. Guitar Mix Knob

Controls your guitar volume when it’s routed to the main

outputs (when the Guitar Thru jack is not used).The center

Auto detent position automatically balances your guitar

volume with your voice. Adjusting above or below the Auto

position removes the automatic guitar level feature.

4. FX (Effects) Level Knob

Raises or lowers the mix level of the effect selected with

the FX button.

5. Harmony Level Knob

Adjusts the mix levels of the harmony and double effects.

Front Panel

Input

Tone

Guitar FX Harmony

Auto

1 2 3 4 5

1. Input Knob and LED

Adjust the Input Knob so that while you sing, the LED

beside it flashes green, sometimes orange but never red.

2.Tone Button

This engages the Live Engineer Effects which

automatically modifies your voice and makes it sound

smoother and brighter. When engaged, this effect is

always on your voice, even in Bypass.

Questions and Answers:

Need help?

Do you have a question about the TC-Helicon VoiceTone Harmony-G and is the answer not in the manual?

TC-Helicon VoiceTone Harmony-G Specifications

Analog Inputs

mic input impedance	1 kOhm
mic input sensitivity at 0dBFS	-44 dBu to +2 dBu
mic input sensitivity at 12dB headroom	-56 dBu to -10 dBu
guitar input impedance	1 MOhm
guitar input sensitivity	+15 dBu at 0dBFS
equivalent input noise	-126 dBu at max. mic amp gain, Rg = 150 Ohm

Analog Outputs

main output impedance	40 Ohm
main output level	+2 dBu at 0dBFS
guitar thru output impedance	270 Ohm

Input to Output Analog Audio Performance

dynamic range, mic at min gain	>108 dB, 20 Hz - 20 kHz A-weighted
dynamic range, mic at -18 dBu sensitivity	>104 dB, 20 Hz - 20 kHz
thd+ noise, mic at min gain	<-90 dB
frequency response at max gain	-1.5 dB at 40 Hz, +0/-0.3 dB (200 Hz to 20 kHz)
guitar in to thru dynamic range	>119 dB
tuning mute attenuation	>100 dB

Conversion Characteristics