Name: TC-Helicon VoiceTone Harmony-G
Brand: TC-Helicon
Rating: 4 (1 reviews)

To Next Page

To Previous Page

6. Preset Select Button and Preset Display

Press to cycle through the 5 presets numbered 1 to 5 shown

in the Preset display. Hold to store changes you make. The

sharp sign (#) is used in the Tuner and Manual modes.

7. 48 Volt Phantom Power LED

For condensor mics, hold the Manual and Double buttons

for 2 seconds to engage and disengage phantom power.

8. Manual Mode Button

Press to toggle guitar control of the harmonies. See how

to use this feature in the “For Advanced Users” section.

9. Double Voice Button

Press this button to simulate the sound of you singing

along with yourself for added thickness.

10. FX Button and LED Display

Pressing the FX button cycles through the effect styles

and FX Off (no LEDs lit) for the current preset.

11. Stereo Select Button

Press and hold the Voice 1 and Voice 2 buttons for 2

seconds to toggle between stereo and mono output.

12.Voice Buttons and Display

Press either of the Voice 1 or Voice 2 buttons to:

a) change the associated voice’s harmony interval

b) enable the harmony voice when its LED is off

c) turn the voice off

The same interval for both voices adds thickness to the

harmony voices.

Front Panel

Preset

Manual Double FX Voice 1 Voice 2

Hall

Room

Echo

Slap

Combi

SFX

Higher

High

Low

Lower

Bass

Octave

48V Stereo

8 9 10 11

Questions and Answers:

Need help?

Do you have a question about the TC-Helicon VoiceTone Harmony-G and is the answer not in the manual?

TC-Helicon VoiceTone Harmony-G Specifications

Analog Inputs

mic input impedance	1 kOhm
mic input sensitivity at 0dBFS	-44 dBu to +2 dBu
mic input sensitivity at 12dB headroom	-56 dBu to -10 dBu
guitar input impedance	1 MOhm
guitar input sensitivity	+15 dBu at 0dBFS
equivalent input noise	-126 dBu at max. mic amp gain, Rg = 150 Ohm

Analog Outputs

main output impedance	40 Ohm
main output level	+2 dBu at 0dBFS
guitar thru output impedance	270 Ohm

Input to Output Analog Audio Performance

dynamic range, mic at min gain	>108 dB, 20 Hz - 20 kHz A-weighted
dynamic range, mic at -18 dBu sensitivity	>104 dB, 20 Hz - 20 kHz
thd+ noise, mic at min gain	<-90 dB
frequency response at max gain	-1.5 dB at 40 Hz, +0/-0.3 dB (200 Hz to 20 kHz)
guitar in to thru dynamic range	>119 dB
tuning mute attenuation	>100 dB

Conversion Characteristics