Name: TC-Helicon VoiceTone Harmony-G
Brand: TC-Helicon
Rating: 4 (1 reviews)

To Next Page

To Previous Page

13. LED Indicator Bar

This translucent bar indicates the A or B selection of

each preset and status of the On footswitch.

14. Preset A and B Select Footswitch

If you only need to access your two favorite sounds in

performance, tapping the A/B footswitch will toggle

between them quickly. If you would like to access more

presets with this footswitch, hold it to enter Preset

Select mode. Now, pressing the A/B button cycles

forward through the five “A” preset settings or “B” preset

settings, depending on whether an A or B was loaded

when you held the footswitch.

15. On Footswitch

Tapping this footswitch engages or disengages the

doubling and harmony effects in the current preset. The

reverb and delay FX will remain active on your voice

even with the harmonies muted. Holding this footswitch

enters Tuner/Bypass mode for silent guitar tuning and

bypassing of all processing except for Tone.

Front Panel

Questions and Answers:

Need help?

Do you have a question about the TC-Helicon VoiceTone Harmony-G and is the answer not in the manual?

TC-Helicon VoiceTone Harmony-G Specifications

Analog Inputs

mic input impedance	1 kOhm
mic input sensitivity at 0dBFS	-44 dBu to +2 dBu
mic input sensitivity at 12dB headroom	-56 dBu to -10 dBu
guitar input impedance	1 MOhm
guitar input sensitivity	+15 dBu at 0dBFS
equivalent input noise	-126 dBu at max. mic amp gain, Rg = 150 Ohm

Analog Outputs

main output impedance	40 Ohm
main output level	+2 dBu at 0dBFS
guitar thru output impedance	270 Ohm

Input to Output Analog Audio Performance

dynamic range, mic at min gain	>108 dB, 20 Hz - 20 kHz A-weighted
dynamic range, mic at -18 dBu sensitivity	>104 dB, 20 Hz - 20 kHz
thd+ noise, mic at min gain	<-90 dB
frequency response at max gain	-1.5 dB at 40 Hz, +0/-0.3 dB (200 Hz to 20 kHz)
guitar in to thru dynamic range	>119 dB
tuning mute attenuation	>100 dB

Conversion Characteristics