Throttle Reset
If for any reason the throttle encounters a problem that it cannot recover
from, the LED ashlight blinks a diagnostic code, which may be helpful to
TCS support. If you encounter this condition, it can be cleared by remov-
ing and reinserting the batteries.
In the event that removing the batteries from the UWT-100 does not
solve the problem, a factory reset may be performed. Navigate to Menu
> Settings > Factory Reset. Performing a factory reset will erase all
network proles, user settings, and throttle settings. After performing a
factory reset, you will need to re-enter your WiFi connection information
as outlined in the section “First-Time Setup.”
Warranty Information
Train Control Systems, Inc. warrants this product to be free from defects
in workmanship and materials, under normal use and conditions, for a
period of one (1) year from the original invoice date. Please visit our web-
site for additional warranty information.
Support and Contact
If you experience issues with your UWT-100 unit or would like to speak
with a technical support representative, please contact us.
TCS Technical Support
techsupport@tcsdcc.com
(267) 733-3408
14
To Next Page
Loading...
Need help?
General