Technicolor TG587n v3 User Manual

21
3 MANUAL INSTALLATION
DMS-CTC-20101206-0017 v1.0
3.1.2 Setting up your Technicolor Gateway as Local Router
Procedure
Proceed as follows:
1 Take an Ethernet cable. If your box contains an Ethernet cable with red connectors, you can use that cable.
2 Plug one end of the cable in the red WAN port on the back of your Technicolor Gateway.
3 Plug the other end of the cable into the Ethernet port of your Internet gateway/modem.
The WAN port can only be used to connect your Technicolor Gateway to an Internet gateway/modem. You can not
use it to connect other devices (for example, a computer) to the Technicolor Gateway.
WAN

Technicolor TG587n v3 Specifications

General

Brand	Technicolor
Model	TG587n v3
Category	Gateway
Language	English